


Evolve
Note: Price is listed in Australian Dollars. Multiply by 0.66 for USD and 0.61 for EUR.
Please note there is about a 2-3 week delay with orders at present due to demand.
The DevTech Audio Evolve is a low gain overdrive inspired by the Pete Cornish CC-1™.
The Evolve features two fixed soft clipping stages preceded by a variable gain preamp. The two soft clipping stages are effectively removed from the audio path when the signal level drops below their transition point – resulting in a gain ‘cleanup’ if the guitar volume is reduced.
Following on from the soft clipping stages is a three band active EQ. Being active, the three tone bands can be both cut and boosted as desired with the zero or neutral point being 12 o'clock on each control knob. A second boost stage has been added after the tone circuit to compensate for any reduction in overall volume when below neutral point.
Unlike passive tone controls, the three active bands are completely independent and there is no interaction between the Bass, Middle and Treble tone controls.
A master volume is included to allow for matching between bypassed and effected signal level, and there is plenty of headroom available to overdrive amplifier inputs if desired.
Please note: There is no room for an internal 9 volt battery. Pedal must be powered by external power source, such as a pedal power supply. DevTech Audio can supply an external battery clip with plug that can be used to plug a 9 volt battery in externally to power the pedal. If this is required, please use the Contact page to advise after placing your order.
TECHNICAL SPECIFICATIONS:
Overall boost with Drive = 100% and Volume = 100% is +34 dB
Overall boost with Drive = 0% and Volume = 100% is +12 dB
The above with Bass, Middle and Treble set to 50% (Neutral point).
Bass Control range +/- 13dB @ 70Hz
Mid Control range +/- 15dB @ 1.5KHz
Treble Control range +/-16dB @ 5KHz
Maximum signal output with Volume 100% is +10dBm/ 2.5vrms/6v Peak to Peak.
Features Include:
· Volume, Drive, Bass, Middle, and Treble controls
· High quality latching footswitch
· Status LED with internal brightness trim
CONTROLS
· VOLUME – Works as a master volume control for the pedal
· BASS – Provides a bass response of +/- 13dB @ 70Hz
· MIDDLE – Provides a middle response of +/- 15dB @ 1.5KHz
· TREBLE – Provides a treble response of +/-16dB @ 5KHz
· DRIVE – Adjusts the amount of gain
· FOOTSWITCH – Toggles between effect mode and true bypass
Evolve
Note: Price is listed in Australian Dollars. Multiply by 0.66 for USD and 0.61 for EUR.
Please note there is about a 2-3 week delay with orders at present due to demand.
The DevTech Audio Evolve is a low gain overdrive inspired by the Pete Cornish CC-1™.
The Evolve features two fixed soft clipping stages preceded by a variable gain preamp. The two soft clipping stages are effectively removed from the audio path when the signal level drops below their transition point – resulting in a gain ‘cleanup’ if the guitar volume is reduced.
Following on from the soft clipping stages is a three band active EQ. Being active, the three tone bands can be both cut and boosted as desired with the zero or neutral point being 12 o'clock on each control knob. A second boost stage has been added after the tone circuit to compensate for any reduction in overall volume when below neutral point.
Unlike passive tone controls, the three active bands are completely independent and there is no interaction between the Bass, Middle and Treble tone controls.
A master volume is included to allow for matching between bypassed and effected signal level, and there is plenty of headroom available to overdrive amplifier inputs if desired.
Please note: There is no room for an internal 9 volt battery. Pedal must be powered by external power source, such as a pedal power supply. DevTech Audio can supply an external battery clip with plug that can be used to plug a 9 volt battery in externally to power the pedal. If this is required, please use the Contact page to advise after placing your order.
TECHNICAL SPECIFICATIONS:
Overall boost with Drive = 100% and Volume = 100% is +34 dB
Overall boost with Drive = 0% and Volume = 100% is +12 dB
The above with Bass, Middle and Treble set to 50% (Neutral point).
Bass Control range +/- 13dB @ 70Hz
Mid Control range +/- 15dB @ 1.5KHz
Treble Control range +/-16dB @ 5KHz
Maximum signal output with Volume 100% is +10dBm/ 2.5vrms/6v Peak to Peak.
Features Include:
· Volume, Drive, Bass, Middle, and Treble controls
· High quality latching footswitch
· Status LED with internal brightness trim
CONTROLS
· VOLUME – Works as a master volume control for the pedal
· BASS – Provides a bass response of +/- 13dB @ 70Hz
· MIDDLE – Provides a middle response of +/- 15dB @ 1.5KHz
· TREBLE – Provides a treble response of +/-16dB @ 5KHz
· DRIVE – Adjusts the amount of gain
· FOOTSWITCH – Toggles between effect mode and true bypass